Description
Features and Information
Sleeping platform/seat in one: easily convertible from a sleeping platform to a seat for more convenient maintenance work. The mechanic's sleeping platform allows you to slide comfortably under a vehicle, while the mechanic's seat allows you to work in a low position sitting down rather than bending over. Protects your back and knees.
Thick and padded seat: the large vinyl cushion is soft and does not compress. The thick headrest provides comfortable sleeping and sitting without fatigue even during prolonged work. The surface is water-resistant and oil-resistant, making it easy to clean when it gets dirty.
Smooth movement: equipped with 6 universal 360° swivel wheels with a diameter of 6.35 cm, the sleeping platform seat can be flexibly guided even on complex surfaces. PP wheels with ball bearings are resistant to pressure and wear, so movement is not difficult. Provides smooth movement across different surfaces.
Durable mechanic's seat: the sleeping platform seat is made from a reinforced tubular steel frame and can withstand loads of up to 136 kg. In seat mode, the tube does not deform, tip over or sway backwards.
Work assistant: the sleeping platform clearance is only 7.6 cm, allowing access to narrow and low spaces. The sleeping platform seat is widely used in garages and repair shops for vehicle repair. Restore your vehicles to their best condition with VEVOR!
2 in 1 Z-shaped sleeping platform and seat
Easily convertible from a sleeping platform to a seat for more convenient maintenance work. The mechanic's sleeping platform allows you to slide comfortably under a vehicle, while the mechanic's seat allows you to work in a low position sitting down rather than bending over.
-
-
-
Quick switching
Free movement
136 kg load capacity
-
-
-
For all work areas
Stable wheels
Easy to store
Material: steel + vinyl
Product dimensions: 91.5 × 41.5 × 12.8 cm
Net weight: 6.7 kg
Maximum load: 136 kg
Wheel diameter: 6.35 cm
2 in 1 sleeping platform and seat design for maximum versatility
VEVOR 2 in 1 Z-shaped car repair sleeping platform with seat is convenient and adaptable for use in any car repair shop. It can be converted from a low-profile sleeping platform to a mobile mechanic's seat in just a few seconds without tools. This convertible design allows easy access under a car for inspection or sitting upright to perform more complex repair work.
The innovative Z-shaped folding design reduces strain on the knees and back, as there is no need to strain when changing work position. This universal solution is suitable for mechanics, car enthusiasts and DIY workers, as it makes prolonged maintenance work more comfortable and faster. VEVOR's thoughtful design allows you to switch between work modes without unnecessary effort, saving time and energy.
Thick, padded cushion for excellent comfort and durability
The seat and backrest are padded with specially thick vinyl, which makes prolonged work easier without discomfort. Dense foam padding protects the seat from compression even after several hours of use and provides good support. The wide seat and padded headrest provide maximum comfort both when lying under a car and when sitting while servicing or assembling parts.
The vinyl finish is water-resistant and oil-resistant, so dirt, grease or oil splashes are easy to wipe off. After wiping with a damp cloth, it can be used again. The cushion is durable, so it will not wear out with daily use and will maintain its shape and comfort for a long time. This seat is suitable for prolonged use in a workshop.
360° smooth rolling wheels for easy movement
VEVOR car repair sleeping platform seat is equipped with six 6.35 cm universal swivel wheels, allowing it to move easily across different types of floors, including concrete, tiles, epoxy coatings and garage floors. PP wheels with ball bearings rotate in all directions, making them easy to manoeuvre even in narrow or crowded spaces.
These wheels are durable and capable of carrying heavy loads without making noise and without losing smooth movement. They are also resistant to wear and compression. You can move easily from one side of a car to the other or around the workshop. The wheels provide greater stability so the platform does not tip over and does not stop suddenly. This allows you to move safely and comfortably in the work area.
Durable tubular steel frame with 136 kg load capacity
VEVOR mechanic's sleeping platform seat is designed for professional use and is equipped with a durable tubular steel frame that easily withstands loads of up to 136 kg. The steel structure has a powder-coated finish, so it does not rust, corrode or bend. This feature allows it to be used for a long time in challenging workshop conditions.
In seat mode, the frame maintains stability and balance, so during movement it does not roll uncontrollably and does not sway. The durable construction evenly distributes weight, reducing the risk of tipping or instability during work. This sleeping platform seat can be used again and again in both a garage, car repair shop and home workshop.
Low clearance for easy access to narrow spaces
With only 7.6 cm clearance and a low profile, it easily slides under cars with limited access. You can change oil, check the exhaust system, adjust brakes or clean the underside of a vehicle without crawling and unnecessary effort.
The sleeping platform is suitable for cars, motorcycles and quad bikes with limited clearance. It allows access to places where work tables or seats normally do not fit. The durable frame and ergonomic design make it easier to get into narrow spaces and get out of them without losing smooth mobility. VEVOR car repair sleeping platform seat is an essential tool for fast, accurate and efficient repair, especially in narrow spaces.
Simple maintenance and convenient assembly of car repair sleeping platform seat
The kit includes everything needed to assemble this mobile mechanic's sleeping platform seat, as well as easy-to-understand instructions. It is suitable for intensive work days, as you can switch between sleeping platform and seat mode in just a few seconds. When not in use, the compact folding design saves space, making storage in small garages or tool sheds simple.
The steel frame is resistant to corrosion, and the vinyl surface is easy to clean, so maintenance is minimal. It can be cleaned, folded and stored in a few minutes. This helps keep the work area tidy. VEVOR 2 in 1 sleeping platform is an excellent choice for both professionals and users who want a reliable and easy-to-use solution.
Ideal assistant for home and professional workshops
VEVOR 2 in 1 Z-shaped car repair sleeping platform seat can make working with cars easier for both a professional mechanic and those who like to do repairs at home. It is suitable for various tasks, including cleaning, engine inspection and vehicle undercarriage maintenance. It can also be used for wheel rotation. You will appreciate how it helps maintain a comfortable posture, sit properly and keep tools at hand during work.
This sleeping platform seat is suitable for car repair shops, detailed cleaning centres, home garages and DIY workshops, as it is durable, comfortable and easy to manoeuvre. It is not just a seat — it is an essential garage equipment that helps you work more efficiently and gives everyday mechanic's work a more professional character.
Delivery: If the item is in our warehouse in Riga, we’ll ship it immediately after payment, and you’ll receive it in 1–3 days; if we’re shipping from our European warehouse, delivery takes 4–9 days. Omniva, DPD, and Latvijas Pasts pickup points—€2.99; free for orders of €100 or more. Door-to-door courier delivery—€7.99; free for orders of €300 or more. Large and heavy items (e.g., stoves, compressors, furniture) are delivered by courier only. Select a pickup point or delivery address when placing your order. We’ll notify you via email at every step—confirmation, shipment, and tracking number—and the parcel locker or courier will send you an SMS notification.
Warranty All items come with a 2-year official manufacturer’s warranty (3 years for certain items), which applies equally to individuals and businesses. To file a warranty claim, email info@zemletes.lv with your order number and a brief description of the issue.
Returns You may return an item within 14 days of receipt without filing a return request—simply contact us and provide your order number. We will issue a refund within 1–7 days after receiving the returned item.
For Businesses
We issue a VAT invoice for each order with your company’s details—please include your company name and VAT number when placing your order. The warranty for businesses is the same as for individuals—2 years. Payment by bank transfer upon receipt of an invoice is available.
Payment options:
Credit card, online banking, Apple Pay, Google Pay, bank transfer, as well as leasing through Klix and Montonio.
Questions? 📞 +371 29215657 · ✉️ info@zemletes.lv · 💬 WhatsApp
Payment Methods and Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.