VEVOR Induction Heater 1800 W, 230 V, for Removing Rusted Bolts and Nuts, with 4 Coils and Carrying Case

Features and Benefits

Fast Disassembly: The 1800 W induction heater warms metal to the required temperature in approximately 8 seconds. The full heating process takes 25–40 seconds, ensuring even heating. No open flame is used during operation and water cooling is not required.

Complete Kit: The magnetic induction heater kit includes 4 heating coils of different sizes, allowing you to perform various and complex metal heating tasks. The kit includes a lockable tool case for convenient storage and transport.

Cooling System: In addition to a cooling fan and overheat protection, the device module is separated to improve heat dissipation and extend the induction heater's service life. The fan operates automatically.

Ergonomic Design: The main unit is equipped with a shoulder strap for convenient carrying and use. The handheld induction heater provides a secure grip and helps reduce wrist joint fatigue. The design does not obstruct the work area, ensuring better visibility and safer operation.

Wide Application: The induction heater is suitable for car repair and mechanical equipment maintenance, especially for short-term intensive heating of larger and thicker parts. Suitable for heating heavy-duty mechanical bolts, nuts, bearings, gears and stuck lathe fasteners.

Safe and Effective Bolt Removal with Induction Heater

The handheld magnetic induction heater delivers up to 1800 W of power, significantly easing the removal of rusted bolts and nuts. Its thermal stability and durable motor ensure long-lasting and reliable operation.

The induction heater features a separated motor design, allowing the use of a larger motor. This provides faster heat transfer in a short time and reduces the risk of uneven heating that could damage joint surfaces. The device is also suitable for processing thicker and larger parts.

The induction heater kit includes multiple coils, allowing convenient processing of irregularly shaped parts. From small bolts to larger bearings – the device provides precise heating. The copper conductor ensures high efficiency, whilst the fibreglass insulation layer is particularly resistant to damage.

The main unit can be carried over the shoulder, thus reducing problems caused by insufficient cable length. The handheld design provides a stable grip and allows more flexible selection of working angle. The built-in cooling fan helps prevent overheating and protects heat-sensitive parts.

To change the coil, simply unscrew the two side nut fastening points on the top. The coil is securely fastened and does not come loose during operation.

Product Specification
Product Model Number: DW-1.8KW
Output Power: 1800 W
Heated Nut Diameter: 5–40 mm
Heating Temperature: approximately 800 °C
Number of Coils: 4
Copper Wire Diameter: 4 mm
Maximum Continuous Operating Time: 90 s
Power Cable Length: 1.5 m
Transport Case Dimensions: 418 × 315 × 136 mm
Main Materials: T2 Copper, 6063 Aluminium, ABS, PA66
Product Weight: 4.46 kg
Product Dimensions: 217 × 110 × 200 mm

1800 W Induction Heater for Rusted Bolts with 8-Second Heating for Fast Disassembly

This 1800 W induction heater can heat metal to the required temperature in just approximately 8 seconds, providing faster operation than many lower-power induction tools used for similar repair work. The full heating cycle takes 25–40 seconds, allowing the fastener to heat evenly throughout its volume, rather than just on the surface. This helps more effectively release corrosion-affected joints before disassembly.

Because the device uses magnetic induction rather than an open flame, water cooling is not required during operation and no open heat source is used. This makes the tool more suitable for work in tight engine compartments, near fuel lines and other confined spaces where you need to quickly release rusted or stuck bolts, whilst reducing the risk of damage to nearby parts, hoses and electrical wiring.

Separated Motor Module with Automatic Cooling Fan for Extended Service Life

The physical separation of the motor module from the main heating system helps dissipate heat more effectively and protects sensitive internal parts from high temperatures during repeated intensive work cycles. This design works together with the built-in cooling fan and overheat protection, helping to control the device's internal temperature during intensive repair work.

The fan switches on automatically, so the operator does not need to monitor or manually activate it. The separated motor module and automatic cooling system help extend the induction heater's working life even when regularly used in car or mechanical equipment repair work.

Shoulder Strap and Ergonomic Grip for More Comfortable Extended Use

The main unit is equipped with a shoulder strap, which facilitates carrying and positioning during extended use. This is particularly useful given the device's weight of approximately 4.45 kg and greater power compared to lighter induction heaters designed for smaller tasks.

The shoulder strap helps distribute the device's weight more evenly, allowing more comfortable movement between work areas. The handheld grip provides a secure hold and helps reduce wrist joint fatigue when processing multiple rusted or stuck fasteners in succession. The design does not obstruct the work area, providing better visibility of the coil and heated part.

4 Heating Coils for 5–40 mm Diameter Fasteners

The kit includes four heating coils designed for heating nuts and fasteners of approximately 5–40 mm diameter. The coils are made from 4 mm copper wire, designed to work with the device's 1800 W power and repeated heating cycles.

The different coil sizes allow you to perform complex and precise metal heating tasks – from small bolts and bearings to larger gears and heavy machinery fasteners. Using multiple coils allows you to adapt the tool to parts of different sizes within a single repair without changing the device itself.

Lockable Tool Case for Safe and Organised Transport

The kit is stored and transported in a lockable tool case with dimensions of approximately 419 × 315 × 137 mm. It conveniently and safely stores all four heating coils, protecting them from damage when not in use.

The lockable design helps protect the kit even when left in a vehicle, work site or shared workshop. A single case facilitates equipment transport between work locations and helps keep all coils and accessories organised.

Heavy-Duty Induction Heater with T2 Copper Coils for Intensive Repair Work

The induction heater is made from T2 copper, 6063 aluminium, ABS and PA66 materials and is designed for short-term, intensive heating of larger and thicker parts. The maximum continuous operating time is 90 seconds, so the device is designed for short, concentrated high-power heating cycles rather than prolonged continuous heating of a single part.

It is suitable for heating heavy-duty mechanical bolts, nuts, bearings, gears and stuck lathe fasteners that cannot be easily released with standard hand tools. The device is particularly suitable for car repair and mechanical equipment maintenance, where fast and intensive heating of larger metal parts is required.