Robotic vacuum cleaner for dry and wet cleaning
ECOVACS DEEBOT X12 OmniCyclone is a high-performance robotic vacuum cleaner that combines dust suction and floor washing. This specific ELKO product 1465201 is in black colour, equipped with 22000Pa suction power, intelligent navigation and an automated OmniCyclone base station.
FocusJet stain pre-treatment technology
FocusJet technology is designed to handle stubborn and difficult-to-remove stains. The robot can automatically detect stuck dirt, precisely spray the specific area and then wash it, helping to clean intensively used areas more effectively, such as kitchen floors.
OZMO ROLLER 3.0 floor washing system
The improved OZMO ROLLER 3.0 system uses a 270mm long washing roller. It is 50% longer than the previous generation solution and provides a wider cleaning strip. During cleaning, the roller is continuously rinsed, helping to reduce the re-spreading of dirt across the floor.
Automatic mop lifting on carpets
When carpets are detected, the washing roller automatically lifts by 15mm and a protective mechanism is activated to help prevent wet roller contact with carpet fibres. This allows you to combine hard floor washing and carpet suction in a single cleaning cycle.
22000Pa BLAST suction power
The BLAST system combines a powerful brushless motor and optimised airflow, providing up to 22000Pa suction power and up to 22l/s airflow. This helps effectively collect dust, sand, crumbs, hair and other dirt from hard floors and carpets.
ZeroTangle 4.0 hair tangling protection
ZeroTangle 4.0 uses specially directed airflow and a main brush designed to prevent hair tangling. The system helps direct hair and pet fur directly into the suction channel, reducing their wrapping around the brush and the need for frequent manual cleaning.
TruEdge 3.0 edge cleaning
The TruEdge 3.0 system's extendable washing roller can reach up to 25.8mm further to the sides, helping the robot wash the floor more thoroughly near walls, skirting boards and furniture edges.
TruePass obstacle crossing system
The adaptive TruePass four-wheel system helps the robot overcome individual thresholds up to 24mm in height. In the case of consecutive two-stage obstacles, the robot can overcome a total height of up to 40mm, improving movement between different rooms.
D-ToF LiDAR and AIVI 3D navigation
The robot uses D-ToF LiDAR navigation, AIVI 3D and TruEdge 3D technologies for space mapping and obstacle detection. The system helps create an efficient cleaning route and adapt the robot's movement around furniture and other objects.
AIVI 3D 4.0 intelligent obstacle recognition
The manufacturer's current X12 OmniCyclone description indicates AIVI 3D 4.0 technology, which uses an improved computing system and semantic model to adjust in real-time the distance to various types of obstacles and boundaries.
PowerBoost Charging Plus fast charging
PowerBoost Charging Plus allows you to replenish battery energy even during short maintenance breaks. During a three-minute charge, you can restore up to 13% of battery capacity, helping to continue extended cleaning over larger areas.
OmniCyclone station with 1.6l dust bin
The OmniCyclone station uses a cyclonic dust separation system and a 1.6l capacity dust bin. The manufacturer indicates that depending on actual usage intensity, this volume can provide up to approximately 48 days between manual emptying. The Quick-Clean cleaning ring helps remove dust residue from the bin walls and filter.
Automatic mop washing with heated water
The base station delivers clean, heated water at increased pressure directly onto the washing roller, helping to separate stuck dirt. Dirty water is separated and drained into a separate tank.
Automatic dirty water system self-cleaning
The integrated self-cleaning mechanism in the station operates at speeds up to 5000 rpm and helps separate sediment and dirt, which is then drained through a separate outlet.
3.5l clean and 2.7l dirty water tanks
The OmniCyclone station has a 3.5l clean water tank and a 2.7l dirty water tank. The robot's integrated water tank capacity is 0.11l, and the dust bin capacity is 0.25l.
Hot air drying
After washing, the station can dry the mop roller with hot air up to 63°C. A drying duration of 2, 3 or 4 hours is available, helping to reduce residual moisture and unpleasant odour formation.
AGENT YIKO 2.0 intelligent control
AGENT YIKO 2.0 analyses user cleaning habits, room layout and object placement to automatically adjust suction power, water delivery and cleaning route to your home's specific conditions.
4000mAh battery and up to 497 minutes of operation
The technical data for this specific ELKO product indicates a 4000mAh lithium-ion battery with 17.8V voltage. The maximum stated operating time is up to 497 minutes, and the full charge time is approximately 2.5 hours.
Compact 98mm high body
The robot's dimensions are 353x351x98mm. The low body allows it to access under various furniture and clean floors in places where manual cleaning may be difficult.
2-year warranty
The ECOVACS DEEBOT X12 OmniCyclone with ELKO code 1465201 has a 2-year warranty.
Specification:
Product type: robotic vacuum cleaner with wet cleaning function
Colour: black
Shape: round
Bumper protection: yes
Dust bin type: bagless
Remote control: yes
Automatic return to base station: yes
Base station functions: charging, self-cleaning
Main brush type: roller brush
Side brush: yes
Washing system: OZMO ROLLER 3.0
FocusJet technology: yes
ZeroTangle 4.0: yes
TruEdge 3.0: yes
TruePass system: yes
Clean water tank capacity in base station: 3.5l
Dirty water tank capacity in base station: 2.7l
Dust bin capacity in base station: 1.6l
Robot dust bin capacity: 0.25l
Robot water tank capacity: 0.11l
Suitable surfaces: carpets, hard floors
Wet cleaning: yes
Washable filter: yes
HEPA filter: no
Integrated sensors: laser sensors
Navigation system: D-ToF LiDAR, AIVI 3D, TruEdge 3D
Carpet detection: yes
Automatic mop lifting: yes
Mop lifting height: 15mm
Maximum individual obstacle height: 24mm
Maximum two-stage obstacle height: 40mm
Maximum suction power: 22000Pa
Maximum airflow: 22l/s
Noise level: 61.1dB
Timer: yes
Battery type: lithium-ion
Battery capacity: 4000mAh
Battery voltage: 17.8V
Operating time: up to 497min
Charging time: 2.5h
Typical energy consumption: 110W
Robot dimensions: 353x351x98mm
Robot weight: 5.5kg
Base station dimensions: 380x493x465mm
Total weight: 16.5kg
Package dimensions: 393x457x625mm
Package weight: 20.7kg
Warranty: 2 years
